
Driven to repair.
Committed to care.

Call Bandera
Call Huebner
Call Kirby
ADAS Calibration in San Antonio
Camera or radar calibration after a repair? Start with Certified Collision Center. ADAS calibration and supporting diagnostic services are available through our Bandera, Huebner and Kirby shops, with A&S Diagnostics support. Choose your preferred location and tell us about your vehicle.
A clear starting point
What does ADAS calibration do?
ADAS calibration sets up the cameras and sensors used by a vehicle’s driver-assistance systems according to the applicable vehicle procedure. The work depends on the vehicle, its equipment and the repairs performed. A diagnostic scan and a calibration serve different purposes.
01
Review the vehicle
Share the VIN, repair history and any messages you see. These details help identify the applicable work.
02
Confirm the procedure
The vehicle’s requirements determine the calibration method and setup.
03
Choose your shop
Bandera, Huebner and Kirby can all be your starting point for this service.
After relevant repair work
When might calibration be needed?
Work involving a windshield, bumper, camera, radar unit, alignment or suspension may create a calibration requirement. That does not mean every repair requires the same procedure. The team reviews the vehicle and repair details before defining the work.
If you are arranging collision repair or bumper repair, include those details in your estimate request.
Camera & sensor systems
Support for driver-assistance features
A&S’s service information covers systems associated with lane assistance and adaptive cruise control; blind-spot and cross-traffic alerts; parking and surround-view cameras; traffic-sign recognition; and collision warning, emergency braking and pedestrian detection.
Your vehicle may have different equipment. Share the VIN so the team can confirm support and the required procedure for your specific vehicle.
The vehicle determines the method
Static and dynamic calibration
Static calibration uses a measured target arrangement and an appropriate work area. Dynamic calibration follows specified driving conditions with the required diagnostic tools. A vehicle may call for one method or both.
The team confirms the setup and service arrangements for your vehicle. Choosing a CCC shop does not mean every operation uses the same equipment or takes place in-house at that location.
Related repair support
Diagnostics and programming are separate services
Before-and-after scans help document a vehicle’s electronic systems around repair work. Fault investigation, module programming and initializations address other parts of the repair process; they are not substitutes for a required calibration.
Through A&S, supporting services also include wiring and connector repairs, alignment and sensor adjustments, air-conditioning recharge, airbag and SRS work, and mechanical repair support. Tesla diagnostic requests require a vehicle-specific support check. Tell your preferred shop what you need so it can confirm the scope.
Learn more from A&S Diagnostics’ service guide or ask CCC about electrical and mechanical repair services.
Make the first conversation useful
What to include in your request
-
Your vehicle’s year, make, model and VIN, if available.
-
What was damaged, repaired or replaced.
-
Any dashboard warnings, fault information or repair paperwork you have.
-
Your preferred CCC shop and the best way to reach you.
The team can discuss the work, price and schedule once it reviews your vehicle. A free estimate request is the first step; it is not a confirmed appointment.
Start with your preferred shop
Describe the repair or warning message. You can choose Bandera, Huebner or Kirby on the existing estimate form.
Vehicle support, procedure and service arrangements are confirmed for each request.
One service network
ADAS service through all three shops
Certified Collision Center offers ADAS calibration and supporting diagnostic services through our Bandera, Huebner and Kirby locations in San Antonio. Choose the shop that works best for you and request a free estimate.
Bandera
7240 Bandera Rd
Request ADAS calibration or diagnostic support through Bandera. Share your vehicle and repair details.
Huebner / Oakland
8880 Oakland Rd
Request ADAS calibration or diagnostic support through Huebner. Share your vehicle and repair details.
Kirby
5211 Old Seguin Rd
Request ADAS calibration or diagnostic support through Kirby. Share your vehicle and repair details.
Answers before your visit
ADAS calibration questions
Is a diagnostic scan the same as calibration?
No. A scan reads information from vehicle systems. Calibration performs the applicable camera or sensor setup. A repair may require both.
Does every windshield or bumper repair need calibration?
The requirement depends on the vehicle and work performed. Share the VIN and repair details so the team can review the applicable procedure.
Can I use any Certified Collision Center shop?
Yes. ADAS calibration and the supporting diagnostic services described here are available through Bandera, Huebner and Kirby. Choose your preferred shop on the estimate form.
Will the work be performed at my chosen shop?
Your selected shop is your point of contact. The team confirms where the specific procedure will be performed and any transport or setup arrangements. Mobile service is not promised for every job.
How much does ADAS calibration cost?
The cost depends on the vehicle, systems involved, required procedure and any related diagnostic work. Request a free estimate for your vehicle’s scope and current scheduling.
Can you support my vehicle?
Provide the VIN and repair details. The team confirms the available support for your specific vehicle; no page can establish coverage for every make, model and system.
Ready for the next step?
Tell us about your vehicle
Choose a shop and share the repair details. We’ll help you discuss the next step.
Explore related services
Collision repair →Bumper repair →A&S Diagnostics: calibration guide ↗